Meanwell TDR-960-24 Power Supply
Tính Năng:
• Three-Phase 340~550VAC wide range input (Dual phase operation possible)
• Width only 110mm
• Built-in active PFC function compliance to EN61000-3-2
• High efficiency 94.5% and low power dissipation
• Protections: Short circuit / Overload / Over voltage / Over temperature
• Cooling by free air convection
• Built-in constant current limiting circuit
• Can be installed on DIN rail TS-35/7.5 or 15
• UL 508(industrial control equipment) approved
• EN61000-6-2(EN50082-2) industrial immunity level
• Current sharing up to 3840W(3+1)
• Built-in DC OK relay contact
• 100% full load burn-in test
Thông số chi tiết về sản phẩm
| Model | TDR-960-24 | TDR-960-48 | |
| OUPUT | DC VOLTAGE | 24V | 48V |
| RATED CURRENT | 40A | 20A | |
| CURRENT RANGE | 0 ~ 40A | 0 ~ 20A | |
| RATED POWER | 960W | 960W | |
| RIPPLE & NOISE (max.) Note.2 | 180mVp-p | 250mVp-p | |
| VOLTAGE ADJ. RANGE | 24 ~ 28V | 48 ~ 55V | |
| VOLTAGE TOLERANCE Note.3 | ±1.0% | ±1.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±1.0% | ±1.0% | |
| SETUP, RISE TIME | 1000ms, 100ms/400VAC 800ms, 100ms/500VAC at full load | ||
| HOLD UP TIME (Typ.) | 12ms/400VAC 14ms/500VAC at full load | ||
| INPUT | VOLTAGE RANGE Note.4 | Three-Phase 340 ~ 550VAC (Dual phase operation possible) 480 ~ 780VDC | |
| FREQUENCY RANGE | 47 ~ 63Hz | ||
| POWER FACTOR(Typ.) | PF≥0.88/400VAC PF≥0.86/500VAC at full load | ||
| EFFICIENCY (Typ.) | 94% | 95% | |
| AC CURRENT (Typ.) | 2A/400VAC 1.4A/500VAC | ||
| INRUSH CURRENT (Typ.) | COLD START 60A | ||
| LEAKAGE CURRENT | <3.5mA/530VAC | ||
| PROTECTION | OVER LOAD | 105 ~ 130% rated output power | |
| Protection type: Constant current limiting , unit will shut down after 3sec, re-power on to recover | |||
| OVER VOLTAGE | 29 ~ 33V | 56 ~ 65V | |
| Protection type : Shut down O/P voltage , re-power on to recovery | |||
| OVER TEMPERATURE | Shut down O/P voltage, recovers automatically after temperature goes down | ||
| FUNCTION | DC OK RELAY CONTACT RATING(max.) | 60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load | |
| CURRENT SHARING | Please refer to function manual | ||
| ENVIRONMENT | WORKING TEMP. Note.5 | 30 ~ +70⁰C (Refer to “Derating curve”) | |
| WORKING HUMIDITY | 20 ~ 95% RH non- condensing | ||
| STORAGE TEMP., HUMIDITY | 40 ~ +85⁰C, 10 ~ 95% RH non- condensing | ||
| TEMP. COEFFICIENT | ±0.03%/⁰C (0 ~ 50⁰C) | ||
| VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | ||
| SAFETY & EMC (Note6) |
SAFETY STANDARDS | UL508 approved, EAC TP TC 004, IEC60950-1 CB approved SIQ | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2.0KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5K/VAC | ||
| ISOLATION RESISTANCE | I/P-O/P,I/P-FG,O/P-FG:>100M Ohms / 500VDC / 25⁰C / 70% RH | ||
| EMC EMISSION | Compliance to EN55032 (CISPR32), EN61204-3 class B,EN61000-3-2,-3, EAC TP TC 020 | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024, EN61000-6-2(EN50082-2),EN61024-3, heavy industry level, criteria A, EAC TP TC 020 | ||
| OTHERS | MTBF | 59.4K hrs min. MIL-HDBK-217F(25⁰C) | |
| DIMENSION | 110*125.2*150mm (W*H*D) | ||
| PACKING | 2.47Kg; 6pcs/15.8Kg/1.47CUFT | ||
Hình Ảnh về Bộ nguồn Meanwell TDR-960-24
Hình ảnh Bộ Nguồn Meanwell TDR-960-24
Tags: click vào ký tự bên dưới để được chuyển trực tiếp đến Những sản phẩm liên quan Bộ nguồn Meanwell TDR-960-24 nhanh nhất !!!
Bộ nguồn Meanwell TDR-960-48
Để biết thêm chi tiết về sản phẩm vui lòng liên hệ với chúng tôi để biết thêm những sản phẩm liên quan và tương đương !!!
Ân vào Model bất kỳ để tải Tài Liệu TDR-960-Spec , Data sheet TDR-960-24 , TDR-960-24 Spec